DRMS Interface

DRMS Interface

BoviSync and PC-Dart Data Exchange

  1. Verify you are in the correct farm (top red box in the picture below)
  2. If you were not logged in, then log into the farm. Click on the farm name, then “Open Herd”
  3. Select the farm and click “Open”
  4. Go to the data exchange, in the navigator (top right corner) type in DRMS or PCD, and press enter.  Alternatively go to:  https://bovisync.farm/drms_data/
  5. Click PCD Tab on the Top

6. Click Upload Herdcode.PCD
7. Generate the HERDCODE.PCD file inPC DART
8. Select the HERDCODE.PCD file that was generated from PC DART
9. Click “Import”
10. This will take you back to the PC-Dart Download page.  When the file is available a link will be available that says “Download PCD-DAT”
11. Click that link and the PC-DAT.001 file will download, use that file to import into PC-DART

 

If you have a previous PCD-DAT.001 file in the same folder it downloads to, the new file will download as PCD-DAT (1).001. PC-Dart is unable to find this file name, you need to rename the file to PCD-DAT.001 in the directory PC-Dart looks for the file. Removing the file after using it is advisable so it downloads with the correct name every time.


    • Related Articles

    • How to get .dat milk file for DHI-Plus Milk Testers

      Written Instructions: 1. Login to BoviSync 2. Open the herd 3. Type "dhiplus" or "provo" into the Navigator and strike Enter on the keyboard 4. The milk tester's .dat file will begin to download automatically 5. Load the .dat file into DHI-Plus   ...

    • DHIA Herd History Request

      How to Request DHI History in BoviSync: Written Instructions: 1. Click 'Setup' and click 'Herd Settings' 2. 'Click the 'Settings' Tab 3. Enter your DHI Herd Code, Access Code, and Testing Lab. 4. Click 'Request Herd History Import' 5. You will be ...

    • Import DHIA Test Results

      For processed testing, PAGs and Johnes results, you can ask your DHIA testing processor to send the files direct to BoviSync and have the results automatically imported. If they have any questions, your tester can request information by email us at: ...

    • DHIA Compliance and Milk Meter Monitoring Report

      This KB article will walk through the process of logging into a BoviSync herd, Running the DHIA Compliance and Milk Monitoring Report, exporting the reports, and links for shift specific deviation reports. This report will allow you to calibrate the ...

    • Import PCMILK Files

      To import PCMILK files follow the steps below: 1. Login to BoviSync Herd 2. Click Setup > Import 3. There are two PCMILK import options: PCMILK 2X (Automatically will factor the data by 2X) PCMILK 3X (Automatically will factor the data by 3X) 4. ...