How To: Import Total Protein Values

How To: Import Total Protein Values

This knowledge base article will walk you through the steps required to import Total Protein Data into BoviSync using the DC305 import method. 

1. Prepare the import file. Attached to this article you will find bovievents_total_protein.csv   

This is the template that will get you started, fill the spreadsheet out as shown:


In the excel file, column G, is where you will place the technicians. For each technician you will need to assign a different number. 



2. After you have prepared the file, save the file as: bovievents.csv

The file must be a CSV (comma delimited) (*csv) and named bovievents or the import will fail.



3. Navigate to BoviSync and open the import for DairyComp305, or click here. 

3A: Here is where you will map the technician number (#) to a BoviSync technician as shown below:



3B: Next, select "Choose File" under Events File and select the bovievents.csv file you saved in step #2

3C: Finally, select the "Import" button at the bottom of the page


4. After the file imports, the data will like the following:


    • Related Articles

    • Import DHIA Test Results

      For processed testing, PAGs and Johnes results, you can ask your DHIA testing processor to send the files direct to BoviSync and have the results automatically imported. If they have any questions, your tester can request information by email us at: ...

    • Importing Diagnostic Test

      Objective: The Import for Diagnostic Test Results in BoviSync allows farms to import test results as a file. Diagnostic tests results have corresponding items that can be used in reports and/or sent to the phones. Using this import will save time ...

    • Import Genomic Information into BoviSync

      This guide will walk through the process of importing genomic information into BoviSync. This import type can be used to import files from: CDC, Jegen, Neogen or Zoetis. Each of the files has requirements for the first several columns of the report. ...

    • Import PTA information into BoviSync

      This article will walk through the process of importing and reporting on specific PTA information in BoviSync. Preparing the File for Import Currently the PTA items which you can report on from an animal report are: PTA Cow Conception Rate PTA ...

    • Import Milk Weights (FTECH)

      To import milk weights only into BoviSync follow the instructions below: Written Instructions: If you are using FTECH, this command will get the same file as steps 1-4: SETUP\5RHERDCODE.CSV!EVENTS\4HS20!SETUP\5P!SETUP\4 If you do this command, you ...