Why Milk, Milk2d or Milk3d Is Blank When the Cow Has Parlor Records

Why Milk, Milk2d or Milk3d Is Blank When the Cow Has Parlor Records

If a cow's Milk, Milk2d or Milk3d is blank on a report, it usually means one of her milkings that day came in with no weight. The report only shows a daily total when every milking that day has a weight. The report is working as designed.

The issue

You run a report with daily milk columns and see a cow with Milk, Milk2d or Milk3d blank. It looks like the data didn't come in. When you open her animal page, though, she has parlor records for those days and the Daily tab shows a milk weight. You may also see an older column, like Milk7d, with a value while the recent columns are blank.

The report isn't broken. It's how the report handles a day where one milking has no weight.

Why it happens

If a milking has no weight, the report treats that day as incomplete and leaves the daily column blank. It won't show one milking as the whole day's total. That number would be too low and look like a production drop.

The daily columns look back from the report date:

  • Milk = yesterday
  • Milk2d = 2 days ago
  • Milk3d = 3 days ago

The milkings with no weight are real parlor visits. They have a pen and an attach time, and they aren't reattachments. The milk weight, duration and peak flow were never stored for that milking.

Example

This is a report run November 10 for a cow milked twice a day. Each of the first three days is missing one weight, so all three columns are blank.

Column

Date

AM milking

PM milking

On the report

Milk

Nov 9

42.6 lb

No weight

Blank

Milk2d

Nov 8

39.8 lb

No weight

Blank

Milk3d

Nov 7

41.2 lb

No weight

Blank

Not in these columns

Nov 6

44.1 lb

40.3 lb

Would show 84.4 lb

Not in these columns

Nov 5

43.5 lb

41.7 lb

Would show 85.2 lb

November 5 and 6 have both weights, so they would show. Milk, Milk2d and Milk3d just don't look at those days.

Why the Daily tab shows a number

The Daily tab on the animal page adds up whatever weights are there, even when a milking is missing. The report waits until every milking has a weight. That's why the two can show different numbers for the same day.

It's also why an older column like Milk7d can have a value while Milk is blank. That older day had a weight for every milking.

What to check

  1. Open the cow's parlor records for the blank days.
  2. Look for milkings that have an attach time but no milk weight. If you find one, the report is working as designed.
  3. If lots of cows have this, or it keeps happening, check with your parlor system provider that milk weights are being recorded and sent.
  4. Contact BoviSync Support if the weights are in your parlor software but aren't coming into BoviSync.